View IE-784038-NS-EM1_2135904.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

users manual target device m m m m pd784038 subseries m m m m pd784038y subseries IE-784038-NS-EM1 emulation board document no. u13760ej1v0um00 (1st edition) date published may 1999 n cp(k) printed in japan 1999 ?
users manual u13760ej1v0um00 2 [memo]
users manual u13760ej1v0um00 3 windows is either a registered trademark or a trademark of microsoft corporation in the united states and/or other countries. pc/at is a trademark of international business machines corporation. the information in this document is subject to change without notice. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec corporation. nec corporation assumes no responsibility for any errors which may appear in this document. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. no license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or of others. m7a 96. 10
users manual u13760ej1v0um00 4 regional information some information contained in this document may vary from country to country. before using any nec product in your application, piease contact the nec office in your country to obtain a list of authorized representatives and distributors. they will verify: ? device availability ? ordering information ? product release schedule ? availability of related technical literature ? development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) ? network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. nec electronics inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 fax: 408-588-6130 800-729-9288 nec electronics (germany) gmbh duesseldorf, germany tel: 0211-65 03 02 fax: 0211-65 03 490 nec electronics (uk) ltd. milton keynes, uk tel: 01908-691-133 fax: 01908-670-290 nec electronics italiana s.r.l. milano, italy tel: 02-66 75 41 fax: 02-66 75 42 99 nec electronics (germany) gmbh benelux office eindhoven, the netherlands tel: 040-2445845 fax: 040-2444580 nec electronics (france) s.a. velizy-villacoublay, france tel: 01-30-67 58 00 fax: 01-30-67 58 99 nec electronics (france) s.a. spain office madrid, spain tel: 91-504-2787 fax: 91-504-2860 nec electronics (germany) gmbh scandinavia office taeby, sweden tel: 08-63 80 820 fax: 08-63 80 388 nec electronics hong kong ltd. hong kong tel: 2886-9318 fax: 2886-9022/9044 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-528-0303 fax: 02-528-4411 nec electronics singapore pte. ltd. united square, singapore 1130 tel: 65-253-8311 fax: 65-250-3583 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 fax: 02-2719-5951 nec do brasil s.a. electron devices division rodovia presidente dutra, km 214 07210-902-guarulhos-sp brasil tel: 55-11-6465-6810 fax: 55-11-6465-6829 j99.1
users manual u13760ej1v0um00 5 introduction product overview the IE-784038-NS-EM1 is designed to be used with the ie-78k4-ns to debug the following target devices that belong to the 78k/iv series of 16-bit single-chip microcontrollers. m pd784038 subseries: m pd784031, 784035, 784036, 784037, 784038, 78p4038 m pd784038y subseries: m pd784031y, 784035y, 784036y, 784037y, 784038y, 78p4038y target readers this manual is intended for engineers who will use the IE-784038-NS-EM1 with the ie- 78k4-ns to perform system debugging. engineers who use this manual are expected to be thoroughly familiar with the target devices functions and use methods and to be knowledgeable about debugging. organization when using the IE-784038-NS-EM1, refer to not only this manual (supplied with the ie- 784038-ns-em1) but also the manual that is supplied with the ie-78k4-ns. ie-78k4-ns IE-784038-NS-EM1 users manual users manual basic specifications general system configuration part names external interface functions installation differences between target devices and target interface circuits purpose this manuals purpose is to explain various debugging functions that can be performed when using the IE-784038-NS-EM1.
users manual u13760ej1v0um00 6 terminology the meanings of certain terms used in this manual are listed below. term meaning emulation device this is a general term that refers to the device in the emulator that is used to emulate the target device. it includes the emulation cpu. emulation cpu this is the cpu block in the emulator that is used to execute user-generated programs. target device this is the device (a real chip) that is the target for emulation. target system the device that is targeted for debugging. this includes the target program and the hardware provided by the user. when defined narrowly, it includes only the hardware. ie system this refers to the combination of the ie-78k4-ns and the IE-784038-NS-EM1. conventions data significance: higher digits on the left and lower digits on the right note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information related documents the related documents (users manuals) indicated in this publication may include preliminary versions. however, preliminary versions are not marked as such. document number document name english japanese ie-78k4-ns u13356e u13356j IE-784038-NS-EM1 this manual u13760j id78k4-ns integrated debugger reference windows? based u12796e u12796j m pd784038, 784038y, subseries hardware u11316e u11316j caution the documents listed above are subject to change without notice. be sure to use the latest documents when designing.
users manual u13760ej1v0um00 7 contents chapter 1 general ............................................................................................................. .................11 1.1 system configuration ........................................................................................................ ....................... 12 1.2 hardware configuration...................................................................................................... ...................... 14 1.3 basic specifications........................................................................................................ .......................... 15 chapter 2 part names.......................................................................................................... ..............17 2.1 parts of main unit .......................................................................................................... ............................ 18 chapter 3 installation ........................................................................................................ .............19 3.1 connection .................................................................................................................. ............................... 20 3.2 clock settings.............................................................................................................. .............................. 21 3.2.1 overview of clock settings ................................................................................................ ............. 21 3.2.2 main system clock settings................................................................................................ ............ 23 3.3 pin mask function settings.................................................................................................. .................... 28 3.3.1 wait (wait)/hold (hold) mask function..................................................................................... .. 28 3.3.2 wait/hold display function................................................................................................ .............. 28 3.3.3 nmi interrupt mask function............................................................................................... ............ 28 3.4 low-voltage emulation setting............................................................................................... ................. 29 3.5 external trigger ............................................................................................................ ............................. 30 chapter 4 differences between target devices and target interface circuits ......31 appendix a emulation probe pin assignment table..............................................................35
users manual u13760ej1v0um00 8 list of figures figure no. title page 1-1. system configuration .............................................................................................................................. 12 1-2. basic hardware configuration .................................................................................................................. 14 2-1. IE-784038-NS-EM1 part names ............................................................................................................... 18 3-1. connection of emulation probe ................................................................................................................ 20 3-2. external circuits used as system clock oscillator ..................................................................................... 21 3-3. when using clock that is already mounted on emulation board ................................................................ 22 3-4. when using user-mounted clock ............................................................................................................. 22 3-5. when using an external clock ................................................................................................................. 23 3-6. connections on parts board (when using main system clock or user-mounted clock) ................................ 24 3-7. crystal oscillator (when using main system clock or user-mounted clock) ................................................ 26 3-8. pin alignment of crystal oscillator and socket ........................................................................................... 26 3-9. external trigger input position .................................................................................................................. 30 4-1. equivalent circuit 1 of emulation circuit .................................................................................................... 32 4-2. equivalent circuit 2 of emulation circuit .................................................................................................... 33
users manual u13760ej1v0um00 9 list of tables table no. title page 1-1. basic specifications ............................................................................................................................... .. 15 3-1. main system clock settings ...................................................................................................................... 23 3-2. dip switch setting for wait (wait)/hold (hold) mask function .................................................................. 28 3-3. dip switch setting for wait/hold display function ...................................................................................... 28 3-4. dip switch setting for nmi interrupt mask function .................................................................................... 28 a-1. np-80gc/gk pin assignments ................................................................................................................. 35
users manual u13760ej1v0um00 10 [memo]
users manual u13760ej1v0um00 11 chapter 1 general the IE-784038-NS-EM1 is a development tool for efficient debugging of hardware or software when using one of the following target devices that belong to the 78k/iv series of 16-bit single-chip microcontrollers. this chapter describes the IE-784038-NS-EM1s system configuration and basic specifications. target device m pd784038 subseries m pd784038y subseries
chapter 1 general users manual u13760ej1v0um00 12 1.1 system configuration figure 1-1 illustrates the IE-784038-NS-EM1s system configuration. figure 1-1. system configuration fg cable ie-78k4-ns (sold separately) ns card cable mc card cable ie-70000-cd-if (sold separately) debugger id78k4-ns (sold separately) device file note 1 (sold separately) control software host machine pc-9800 series or ibm pc/at? or compatibles interface board ie-70000-98-if-c (sold separately) interface board ie-70000-pc-if-c (sold separately) interface card interface cable interface cable (ns if cable) in-circuit emulator IE-784038-NS-EM1 (this product) ac adapter ie-70000-mc-ps-b (sold separately) emulation probe note 2 (sold separately) conversion socket/conversion adapter note 3 (sold separately) or
chapter 1 general users manual u13760ej1v0um00 13 notes 1. the device file is as follows, in accordance with the subseries. m s df784038: m pd784038, 784038y subseries 2. the emulation probe is as follows, in accordance with the package. np-80gc: 80-pin plastic qfp (gc type) np-80gk: 80-pin plastic tqfp (gk type) the np-80gc/gk are products of naito densei machida mfg. co., ltd. for further information, contact naito densei machida mfg. co., ltd. (tel: +81-44-822-3813) 3. the conversion socket/conversion adapter are as follows, in accordance with the package. ev-9200gc-80: 80-pin plastic qfp (gc type) tgk-080sdw: 80-pin plastic tqfp (gk type) the tgk-080sdw is a product of tokyo eletech corporation. for further information, contact to daimaru kogyo co., ltd. tokyo electronics department (tel: +81-3-3820-7112) osaka electronics department (tel: +81-6-6244-6672)
chapter 1 general users manual u13760ej1v0um00 14 1.2 hardware configuration figure 1-2 shows the IE-784038-NS-EM1s position in the basic hardware configuration. figure 1-2. basic hardware configuration ie-78k4-ns (sold separately) IE-784038-NS-EM1 emulation probe (sold separately) dedicated bus interface ie system host machine interface board (sold separately) 78k4 main board (g-78k4 main board) 78k4 emulation board (g-78k4 em board) emulation board (this product) interface card (sold separately)
chapter 1 general users manual u13760ej1v0um00 15 1.3 basic specifications the IE-784038-NS-EM1s basic specifications are listed in table 1-1. table 1-1. basic specifications parameter description target device m pd784038, 784038y subseries system clock 16.0 mhz main system clock s upply external: input via an emulation probe from the target system internal: mounted on emulation board (32 mhz), or mounted on the board by the user low-voltage support 2 v or higher (same as target device)
users manual u13760ej1v0um00 16 [memo]
users manual u13760ej1v0um00 17 chapter 2 part names this chapter introduces the parts of the IE-784038-NS-EM1 main unit. the packing box contains the emulation board (IE-784038-NS-EM1). if there are any missing or damaged items, please contact an nec sales representative. fill out and return the guarantee document that comes with the main unit.
chapter 2 part names users manual u13760ej1v0um00 18 2.1 parts of main unit figure 2-1. IE-784038-NS-EM1 part names x2 pd784038clk sw1 dip switch off hold led2 uservdd led1 probe connector cn1 80gc/gk gnd tp1 low volt extin (cp3) extout (cp4) wait led3 tp1 cp3 cp4 IE-784038-NS-EM1 cn1 m
users manual u13760ej1v0um00 19 chapter 3 installation this chapter describes methods for connecting the IE-784038-NS-EM1 to the ie-78k4-ns, emulation probe, etc. mode setting methods are also described. caution connecting or removing components to or from the target system, or making switch or other setting changes must be carried out after the power supply to both the ie system and the target system has been switched off.
chapter 3 installation users manual u13760ej1v0um00 20 3.1 connection (1) connection with ie-78k4-ns main unit see the ie-78k4-ns users manual (u13356e) for a description of how to connect the IE-784038-NS-EM1 to the ie-78k4-ns. (2) connection with emulation probe see the ie-78k4-ns users manual (u13356e) for a description of how to connect an emulation probe to the ie- 784038-ns-em1. on this board, connect the emulation probe to cn1. caution incorrect connection may damage the ie system. be sure to read the emulation probes users manual for a detailed description of the connection method. figure 3-1. connection of emulation probe i/o emulation board (IE-784038-NS-EM1) main board (g-78k4 main board) emulation board (g-78k4 em board) emulation probe (sold separately) cn1 80gc/gk
chapter 3 installation users manual u13760ej1v0um00 21 3.2 clock settings 3.2.1 overview of clock settings the main system clock to be used during debugging can be selected from (1) to (3) below. (1) clock that is already mounted on emulation board (2) clock that is mounted by user (3) external clock if the target system includes an internal clock, select either (1) clock that is already mounted on emulation board or (2) clock that is mounted by user. for an internal clock, the target device is connected to a resonator and the target devices internal oscillator is used. an example of the external circuit is shown in part (a) of figure 3-2. during emulation, the resonator that is mounted on the target system is not used. instead, it uses the clock that is mounted on the emulation board, which is installed for the ie-78k4-ns. if the target system includes an external clock, select (3) external clock. for an external clock, a clock signal is supplied from outside of the target device and the target devices internal oscillator is not used. an example of the external circuit is shown in part (b) of figure 3-2. figure 3-2. external circuits used as system clock oscillator (a) internal clock (b) external clock x2 x2 target device target device external clock x1 x1
chapter 3 installation users manual u13760ej1v0um00 22 (1) clock that is already mounted on emulation board a crystal oscillator is already mounted on the emulation board. its frequency is 32 mhz. figure 3-3. when using clock that is already mounted on emulation board ie-78k4-ns IE-784038-NS-EM1 resonator (not used) mounted oscillator (to be used) emulation probe target system remark the clock that is supplied by the IE-784038-NS-EM1s oscillator (encircled in the figure) is used. (2) clock that is mounted by user the user is able to mount any clock supported by the set specifications on the IE-784038-NS-EM1. first mount the resonator on the parts board, then attach the parts board to the IE-784038-NS-EM1. this method is useful when using a different frequency from that of the pre-mounted clock. figure 3-4. when using user-mounted clock ie-78k4-ns IE-784038-NS-EM1 resonator (not used) target system parts board emulation probe resonator (to be used) remark the clock that is supplied by the IE-784038-NS-EM1s resonator (encircled in the figure) is used.
chapter 3 installation users manual u13760ej1v0um00 23 (3) external clock an external clock connected to the target system can be used via an emulation probe. figure 3-5. when using an external clock ie-78k4-ns IE-784038-NS-EM1 clock generator (to be used) emulation probe target system remark the clock supplied by the target systems clock generator (encircled in the figure) is used. 3.2.2 main system clock settings table 3-1. main system clock settings IE-784038-NS-EM1 frequency of main system clock parts board (x2) cpu clock source selection (id) when using clock that is already mounted on emulation board 32 mhz oscillator used when using clock mounted by user oscillator assembled by user internal when using external clock other than 32 mhz oscillator not used external caution when using an external clock, open the configuration dialog box when starting the integrated debugger (id78k4-ns) and select external in the area (clock) for selecting the cpus clock source (this selects the users clock). remark the IE-784038-NS-EM1s factory settings are those listed above under when using clock that is already mounted on emulation board. (1) when using clock that is already mounted on emulation board when the IE-784038-NS-EM1 is shipped, a 32-mhz crystal oscillator is already mounted in the ie-784038-ns- em1s x2 socket. when using the factory-set mode settings, there is no need to make any other hardware settings. when starting the integrated debugger (id78k4-ns), open the configuration dialog box and select internal in the area (clock) for selecting the cpus clock source (this selects the emulators internal clock).
chapter 3 installation users manual u13760ej1v0um00 24 (2) when using clock mounted by user the settings described under either (a) or (b) are required, depending on the type of clock to be used. when starting the integrated debugger (id78k4-ns), open the configuration dialog box and select internal in the area (clock) for selecting the cpus clock source (this selects the emulators internal clock). (a) when using a ceramic resonator or crystal resonator items to be prepared parts board (supplied with ie-78k4-ns) capacitor ca ceramic resonator or crystal resonator capacitor cb resistor rx solder kit <1> solder the target ceramic resonator or crystal resonator, resistor rx, capacitor ca, and capacitor cb (all with suitable oscillation frequency) onto the supplied parts board (as shown below). figure 3-6. connections on parts board (when using main system clock or user-mounted clock) parts board (x2) pin no. connection 2-13 capacitor cb 3-12 capacitor ca 4-11 ceramic resonator or crystal resonator 5-10 resistor rx 8-9 short circuit diagram 1 m w 11 4 3 12 ca cb 13 2 5 10 rx 9 8 clock out hcu04 hcu04 remark the sections enclosed in broken lines indicate parts that are attached to the parts board. 1 2 3 4 5 6 7 14 13 12 11 10 9 8
chapter 3 installation users manual u13760ej1v0um00 25 <2> prepare the IE-784038-NS-EM1. <3> remove the crystal oscillator that is mounted in the IE-784038-NS-EM1s socket (the socket marked as x2). <4> connect the parts board (from <1> above) to the socket (x2) from which the crystal oscillator was removed. check the pin 1 mark to make sure the board is mounted in the correct direction. <5> make sure that the parts board mounted in the x2 socket on the emulation board is wired as shown in figure 3-6 above. <6> install the IE-784038-NS-EM1 in the ie-78k4-ns. the above steps configure the following circuit and enable supply of the clock from the mounted resonator to the emulation device. 1 m w 11 4 3 12 ca cb 13 2 5 10 rx 98 6 hcu04 hcu04 x als157 ay b hks120 ac125 clk in v cc v cc x1 ie-78k4-ns side (emulation device) vhc244 4.7 k w remark the sections enclosed in broken lines indicate parts that are attached to the parts board.
chapter 3 installation users manual u13760ej1v0um00 26 (b) when using a crystal oscillator items to be prepared crystal oscillator (see pinouts shown in figure 3-7) figure 3-7. crystal oscillator (when using main system clock or user-mounted clock) v cc clock out gnd nc <1> prepare the IE-784038-NS-EM1. <2> remove the crystal oscillator that is mounted in the IE-784038-NS-EM1s socket (the socket marked as x2). <3> connect the crystal oscillator (from <2> above) to the socket (x2) from which the crystal oscillator was removed. insert the crystal oscillator pin into the socket aligning the pins as shown in the figure below. figure 3-8. pin alignment of crystal oscillator and socket crystal oscillator pin name socket pin no. nc 1 gnd 7 clock out 8 v cc 14 <4> install the IE-784038-NS-EM1 in the ie-78k4-ns. 14 13 12 11 10 9 8 v cc clock out gnd nc 1 2 3 4 5 6 7 crystal oscillator socket
chapter 3 installation users manual u13760ej1v0um00 27 the above steps configure the following circuit and enable supply of the clock from the mounted resonator to the emulation device. als157 ay b clk in ie-78k4-ns side (emulation device) v cc crystal oscillator hsk120 ac125 v cc v cc x1 vhc244 4.7 k w (3) when using external clock no hardware settings are required for this situation. when starting the integrated debugger (id78k4-ns), open the configuration dialog box and select external in the area (clock) for selecting the cpus clock source (this selects the users clock).
chapter 3 installation users manual u13760ej1v0um00 28 3.3 pin mask function settings 3.3.1 wait (wait)/hold (hold) mask function by setting the dip switch (sw1) in the IE-784038-NS-EM1, it is possible to mask the alternate function (wait) and (hold) of pin p66 in the m pd784038 subseries. table 3-2. dip switch setting for wait (wait)/hold (hold) mask function dip switch setting status 2 (waitmsk) 3 (holdmsk) 4 (p66on) no mask (initial setting) off off on hold masked off on off wait masked on off off caution do not set the dip switch to settings other than those above. 3.3.2 wait/hold display function by setting the dip switch (sw1) in the IE-784038-NS-EM1, it is possible to display the status of "waiting" and holding with an led light. table 3-3. dip switch setting for wait/hold display function dip switch setting status 5 (holdled) 6 (waitled) hold (hold) status displayed, wait (wait) status not displayed (initial setting) on off hold status not displayed, wait (wait) status displayed off on caution when pin p66 is used as a port pin, unless the dip switch (sw 1 to 5, 6) is turned off the led may light up. 3.3.3 nmi interrupt mask function by setting switch 1 of the dip switch (sw1) in the IE-784038-NS-EM1, it is possible to mask the nmi interrupt, which is the alternate function of the p20 pin. table 3-4. dip switch setting for nmi interrupt mask function dip switch setting status 1 (nmimsk) no nmi mask (initial setting) on nmi masked off caution because the nmi interrupt is the alternate function of the p20 pin, this pin cannot operate as the p20 pin when the nmi mask status has been set.
chapter 3 installation users manual u13760ej1v0um00 29 3.4 low-voltage emulation setting low-voltage emulation is possible in the ie system. when the target system is operating on low voltage, supply the same voltage as the target system to the tp1 terminal pin of the IE-784038-NS-EM1. set the target voltage between 3 and 5 v. maximum current consumption of tp1 5 v 300 ma .. .. .. 3 v 150 ma
chapter 3 installation users manual u13760ej1v0um00 30 3.5 external trigger to set up an external trigger, connect it to the IE-784038-NS-EM1s check pin, extout pin, and extin pin as shown below. see the integrated debugger (id-78k4-ns) users manual (u12796e) for descriptions of related use methods. figure 3-9. external trigger input position off extin extout tp1 ic13 cn1 80gc/gk sw1 dip switch x2 pd784038clk m
users manual u13760ej1v0um00 31 chapter 4 differences between target devices and target interface circuits this chapter describes differences between the target devices signal lines and the signal lines of the ie-784038- ns-em1s target interface circuit. although the target device is a cmos circuit, the IE-784038-NS-EM1s target interface circuit consists of an emulation cpu, ttl, cmos-ic, and other emulation circuits. when the ie system is connected with the target system for debugging, the ie system performs emulation so as to operate as the actual target device would operate in the target system. however, some minor differences exist since the operations are performed via the ie systems emulation. (1) signals directly input/output to/from the emulation cpu (2) signals input from the target system via a gate (3) other signals the ie systems circuit is used as follows for signals listed in (1) to (3) above. (1) signals directly input/output to/from the emulation cpu the following signals perform the same operations as in the m pd784038 subseries. for the signals related to ports excluding port 7 (having alternate functions as pins for a/d converter), however, a 1-m w pull-down resistor and 22- w resistor are inserted in series. signals related to port 0 signals related to port 1 signals related to port 2 signals related to port 3 signals related to port 4 signals related to port 5 signals related to port 6 signals related to port 7 (a/d converter input) astb signal signals related to a/d converter av ref1 to av ref3 av dd av ss signals related to d/a converter ano0 ano1 caution the av dd pin on the target system is not connected to the ie system. either the power supply of the ie system or the power supply supplied to tp1 is supplied to the av dd pin of the emulation cpu.
chapter 4 differences between target devices and target interface circuits users manual u13760ej1v0um00 32 figure 4-1. equivalent circuit 1 of emulation circuit p00 to p07 p00 to p07 22 w 1 m w ie system side probe side p10 to p17 p10 to p17 22 w 1 m w p20 p21 to p27 p30 to p37 p40 to p47 p50 to p57 p60 to p67 p70 to p77 p20 p21 to p27 p30 to p37 p40 to p47 p50 to p57 p60 to p67 p70 to p77 22 w 1 m w 22 w 1 m w 22 w 1 m w 22 w 1 m w 22 w 1 m w 22 w 1 m w astb astb av ref1 to av ref3 av ref1 to av ref3 22 w av dd av dd leave open ac125 v cc ano0, ano1 ano0, ano1 av ss av ss lv cc
chapter 4 differences between target devices and target interface circuits users manual u13760ej1v0um00 33 (2) signals input from the target system via a gate since the following signals are input via a gate, their timing shows a delay compared to that of the m pd784038 subseries. their ac characteristics and dc characteristics are therefore different from m pd784038 subseries, making it necessary to observe a stricter timing design than in the case of m pd784038 subseries. reset signal signals related to clock input figure 4-2. equivalent circuit 2 of emulation circuit ie system side probe side vhc244 as04 as04 vhc244 ac125 vhc244 lv cc altera epm7128-15 100 k w 22 w reset x1 x2 leave open v cc reset clk in IE-784038-NS-EM1 x2 mounted clock target probe x1 pin d hsk120 v cc als157 4.7 k w (3) other signals v dd pin when the emulation cpu is operating at 5 v, its power is supplied from the internal ie system, but when operating at low voltage, its power is supplied from the low-voltage pin (tp1). the v dd pin of the target system is only used to control the led (userv dd ) in the ie system that monitors the input of the target system's power supply. v ss pin the v ss pin is connected to gnd inside the ie system. test pin the test pin is not used in the ie system.
users manual u13760ej1v0um00 34 [memo]
users manual u13760ej1v0um00 35 appendix a emulation probe pin assignment table table a-1. np-80gc/gk pin assignments (1/2) emulation probe cn1 pin no. emulation probe cn1 pin no. 1 114 34 49 2 113 35 50 3 108 36 45 4 107 37 46 5 104 38 41 6 103 39 42 7 100 40 35 899418 994427 10 93 43 14 11 30 44 13 12 29 45 18 13 24 46 17 14 23 47 22 15 20 48 21 16 19 49 28 17 16 50 27 18 15 51 92 19 10 52 91 20 9 53 98 21 37 54 97 22 43 55 102 23 44 56 101 24 47 57 106 25 48 58 105 26 51 59 112 27 52 60 111 28 57 61 83 29 58 62 77 30 59 63 78 31 60 64 73 32 55 65 74 33 56 66 69 remarks 1. the np-80gc/gk are products of naito densei machida mfg. co., ltd. 2. the numbers in the emulation probe column indicate the corresponding pin number on the emulation probe tip.
appendix a emulation probe pin assignment table users manual u13760ej1v0um00 36 table a-1. np-80gc/gk pin assignments (2/2) emulation probe cn1 pin no. emulation probe cn1 pin no. 67 70 74 71 68 63 75 72 69 64 76 75 70 61 77 76 71 62 78 79 72 65 79 80 73 66 80 85 remarks 1. the np-80gc/gk are products of naito densei machida mfg. co., ltd. 2. the numbers in the emulation probe column indicate the corresponding pin number on the emulation probe tip.
users manual u13760ej1v0um00 37 [memo]
users manual u13760ej1v0um00 38 [memo]
although nec has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that errors may occur. despite all the care and precautions we've taken, you may encounter problems in the documentation. please complete this form whenever you'd like to report errors or suggest improvements to us. hong kong, philippines, oceania nec electronics hong kong ltd. fax: +852-2886-9022/9044 korea nec electronics hong kong ltd. seoul branch fax: 02-528-4411 taiwan nec electronics taiwan ltd. fax: 02-2719-5951 address north america nec electronics inc. corporate communications dept. fax: 1-800-729-9288 1-408-588-6130 europe nec electronics (europe) gmbh technical documentation dept. fax: +49-211-6503-274 south america nec do brasil s.a. fax: +55-11-6465-6829 asian nations except philippines nec electronics singapore pte. ltd. fax: +65-250-3583 japan nec semiconductor technical hotline fax: 044-548-7900 i would like to report the following error/make the following suggestion: document title: document number: page number: thank you for your kind support. if possible, please fax the referenced page or drawing. excellent good acceptable poor document rating clarity technical accuracy organization cs 99.1 name company from: tel. fax facsimile message

▲Up To Search▲

Price & Availability of IE-784038-NS-EM1

	To Download IE-784038-NS-EM1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .